Gravimold™
The only dispensing system that is fast enough, accurate enough and can identify tens of thousands of molds.

Basic Functions

• Powder dispensing into the molds without using intermediate containers.
• Automatic identification in “real time” of the mold being filled.
• 3 stage gravimetric dispensing of exact amount into the mold.

Material Conveying

• Continuous supply by twin vacuum receivers – maximum 3500 Lbs/hour.
• Regular vacuum receiver – maximum 2000 Lbs/hour.
• No need for additional reservoir above the dispensing unit.

Mold Identification

• Each mould is fitted with a steel pattern, which is used to identify the mould.
• A special plug is held against the steel pattern, and identifies the mold. The control unit can differentiate between 65,000 patterns, and therefore serve up to 65,000 molds simultaneously.
• Once the pattern is recognized, the operator presses a push-button, and filling commences.
• “Repeat” button – option.
• RotoMan – powerful software to manage molds and products.

Material Dispensing

• Loss-in-weight dispensing.
• “Fast” dispensing – 5 Lbs/sec.
• “Slow” dispensing – 2 Lbs/sec.
• Pneumatic dispensing – 2 oz/sec.
• Accuracy - ±0.2 oz.
• 35 Kg of powder on the RT-30 unit.

And The Result

• Material savings.
• Manpower saving.
• Zero defects.

Typical Mold Filling Speed