In general the injection molding factories can be characterized as an industry with large number of machines that require relatively low material consumption for each injection machine.

The injection molding is a cyclical process. It uses a mold containing an accurate cavity shaped like the product.
The first cycle step is when the mold is closed the extruder inject the molten plastic into the mold.
The second step is the cooling stage, the mold stay close for some time allowing heat to be absorbed by the mold surface and the product freezes.
Usually, at this stage the extruder refill itself for the next cycle (plasticization stage).
The third step the mold opens and the product eject, in many modern machines the ejection combined robot operation to speed up the cycle time.

Some of these machines have several extruders and they produce complicated product with several colors or combination of different plastic materials.

Sysmetric provide several solutions for this type of factories.

In a factory where the default material handling situation means that there is only one main material per machine and there is a need to add color or additive then the use of BeltColor or GraviColor allow precise gravimetric dosing of directly to the machines throat at a relatively low cost.

When the product requires a mixture of more then two materials Sysmetric have a unique solution named Super CS.

The Super CS is an extremely cost effective gravimetric dosing system that can serve nine or more injection machines with nine different blends and colors at the same time.

Sysmetric are specialized in material handling Conveying systems and data Acquisition.

.